Wire harnesses, wiring kits and electrical panels for equipment makers
We make wire harnesses and wiring kits for makers of electromechanical products, and we assemble electrical panels. We work to your drawing or wire list, in ordinary PVC wire or heat-resistant silicone wire. For years we have made the internal wiring in series for a well-known Estonian sauna heater brand, whose heaters are sold in the EU, the UK, the US, China and Australia.

What we do
Wire harnesses to your drawing
We cut wires to length, strip and terminate them, and assemble them into harnesses and kits. We work from your drawing, your wire list or an existing harness. We also make single leads when you need them.
Cutting and stripping by machine
Two automatic cut-and-strip machines handle wire from 0.1 to 6 mm². A wire can be anything from half a millimetre to almost ten metres long, stripped up to 30 mm. Both machines strip PVC and silicone insulation cleanly.
Crimping terminals and ferrules
Flat receptacles and other terminals on a reel are crimped on an automatic terminal press with its own applicator for each terminal type. Ferrules and non-insulated terminals up to 16 mm² go through a pneumatic crimper with interchangeable dies. The press applies the same force every time, so every crimp is the same.
Electrical panel assembly
We assemble electrical panels to your schematic, with the components you choose: we mount the modular devices and terminals on DIN rails and wire the panel. If you build your own panels, we make a ready wiring kit for each one, with every wire cut to length, stripped and fitted with a ferrule.
The right wire and components
We use the wire your product needs: ordinary PVC wire, heat-resistant SiF silicone wire (−50 … +180 °C), or UL-recognised SiF A wire for North America. We buy the wire, terminals and terminal blocks ourselves, mostly from TME. If your product’s certificate names a specific maker or part number, we use exactly that and never substitute an equivalent.
One kit per device
We put one device’s wires, terminal blocks, terminals and earth leads into a single kit and pack it the way your assembly line works, for example 50 kits to a box. The fitter takes a kit out of the box and can start straight away. You don’t need dozens of part numbers in stock, because we supply the whole kit.
Terminals, wire and assembly
The photos come from stock libraries. You see your own product as a sample before the series and can try it in your device.
How the workshop grew with its customer
At first we did everything by hand. We measured and cut each wire, stripped the ends with pliers and crimped every terminal on its own. We did that thousands of times, because an Estonian sauna heater maker needed its own wiring kit in every heater. As volumes grew, we bought our first automatic cut-and-strip machine. Then came a terminal press that takes terminals straight from the reel, a second cut-and-strip machine for thicker wire up to 6 mm², and a pneumatic crimper for ferrules. Today machines do much of the work that used to be done by hand, and every kit is the same. Our customer’s assembly line sees fewer errors and can count on our deliveries. The machines have spare capacity now, so we are looking for new customers.
Questions and answers
What do you need for a quote?
Send a drawing or a wire list: each wire’s cross-section, colour and length, the terminal or ferrule at each end, any other components, and the batch size. If there is no drawing, an existing harness or a good photo with dimensions is enough. We then write the list ourselves and send it to you to confirm. You get the quote within 2 working days, with the price per kit, the materials and the lead time. If you will order repeatedly, tell us the expected yearly quantity: we can then buy material ahead, and the price is usually lower.
Do you make small batches, and is the sample free?
There is no minimum order: we make a single prototype as well as thousands of kits. For a small batch, the quote shows the machine set-up cost as a separate line, so you can see what the price is made of. For a new harness or kit we make up to three samples free of charge before the series. You try them in your device, and series production starts only after you approve them. For an electrical panel, the first panel is a normal order.
What is your lead time?
For a first sample and for a repeat order it is usually 2–4 weeks. We give the exact time in the quote, because it depends on the quantity, how complex the kit is and whether the components are in stock. The common wires and terminals are in our stock; we order the rest from TME, and it usually arrives within a few days. For repeat orders we agree a fixed schedule, for example the same quantity on an agreed day each month. That way we stock material ahead, and your assembly line doesn’t wait for wiring.
Which wires and terminals do you work with?
Single-core PVC and silicone wire. For silicone we mostly use SiF wire (for example Lapp ÖLFLEX HEAT 180 SiF, −50 … +180 °C, 300/500 V) and, for the North American market, UL-recognised SiF A wire. Wire from 0.1 to 6 mm² is cut and stripped by machine; thicker wire (up to 16 mm²) is cut by hand and crimped on the pneumatic crimper. For terminals we use flat receptacles (Faston) and ring terminals, plus ferrules and terminal blocks. If your product’s certificate names a specific maker or part number, we use exactly that.
Do you assemble electrical panels too?
Yes. We assemble the panel to your schematic with the components you choose: we mount the modular devices and terminals on DIN rails and wire the panel. If you build your own panels, we make just the wiring kit: the wires for each panel, cut to length, stripped and fitted with ferrules. Wiring the panel then takes you less time.
Is your wiring suitable for hot appliances, and what about certification?
In a sauna heater, an oven or near a heating element the temperature gets higher than PVC wire can take, which is why these use silicone wire. SiF wire takes up to 180 °C continuously. Wiring we have made is in appliances sold in the EU, the UK, the US, China and Australia. The maker of the finished appliance is responsible for its compliance. We build the wiring exactly from the materials you specify and give you a list of the materials in each kit for the appliance’s technical documentation (for example under EN 60335).
Who makes the wiring, and who do I deal with?
A small workshop in Estonia makes it. EZYsmart handles sales and customer contact, which is why this page is on ezysmart.cc. You have one contact person who knows where your order stands and agrees changes directly with the workshop. Write to hi@ezysmart.cc or call +372 52 888 46.
Send a drawing, a wire list or an existing harness
Within 2 working days you get a quote with the price, the materials and the lead time. Before the series we make a free sample you can try in your device.